Luxman M-900u, Руководство пользователя

Страница: 5 / 20

STEREO POWER AMPLIFIER M-900u
3
4-parallel speaker relay
Impedance of speaker output lines reduced thanks to place-
ment of 4-parallel contact structure of speaker relays with low
resistance value for each channel.
Schottky barrier diode
Application of schottky barrier diode manufactured by Nihon
Inter Electronics Corporation that has less switching noises
and higher conversion efficiency to the DC voltage for the
power supply rectifier circuit.
LUXMAN’s original OFC wires
Our original OFC wires are used in the internal wiring to
achieve smooth signal transmission thanks to the spiral wrap
shielding on each core and the non-plating process on the
core wire.
Peel coat, PCB
Dielectric effect of resist eliminated by using copper foil of
100μm in thickness and gold plating on audio circuit board
instead of using resist.
High-grade analog meter
Large-sized analog meter with shower light equipped, light
OFF/meter OFF selectable.
Loopless chassis
This unit consists of the independent construction of a
loopless chassis to eliminate increased ground impedance
caused by chassis current.
Large type of speaker terminals
Speaker terminals with right and left identical characteristics
layout, which is compatible with Y lugs to enable easy con-
nection with extra-thick speaker cables.
AC inlet
This inlet enables the connection with an external power ca-
ble.
Cast-iron insulator
This unit is equipped with gradation cast-iron insulators that
cuts out unnecessary external vibration and strongly supports
the weight of this unit.