Luxman D-10X, Руководство пользователя

Страница: 41 / 48

38
SUPER AUDIO CD PLAYER D-10X
Digital output selection (DIGITAL OUT)
button
Remote control
•
Main unit
Use this button to engage the unit’s digital
audio output. Each time the button is
pressed, the output will be turned on or off.
When the HD layer of a Super Audio CD or a DSD file is
played back, a digital audio output is not available. In this
case, the DIGITAL OUT indicator turns off.
It is possible to turn on or off the digital audio output when
playing back the CD layer of Hybrid Super Audio CD.
When PCM data of 352.8 kHz, 384 kHz, 705.6 kHz or
768 kHz sampling frequency is played back, digital audio
output is not available.
Phase invert button (PHASE INVERT)
Main unit
Use this button to invert the phase of the analog outputs on
the rear panel.
Both the balanced output and unbalanced output are
inverted.
This setting is stored on the flash memory even when the
power is turned off.
Every time this button is pressed, the balanced phase
changes as follows: NORMAL
→
INVERT
→
NORMAL
→
INVERT
→
…
[Phase Normal]
1. GROUND
2. COLD (–)
3. HOT (+)
[Phase Inverted]
1. GROUND
2. HOT (+)
3. COLD (–)
How to restore all the settings to the
factory defaults
All settings can be restored to the factory defaults by the
following method
1. Turn off the unit (standby mode).
2. Press the OPERATION button on the main unit while
holding down the stop ( ) button on the main unit.
All the settings will be restored to the factory defaults.
Item Default
Digital input selection INTERNAL (Internal player)
Digital output selection ON
Super Audio CD/CD selection Super Audio CD (SACD)
Phase invert changeover
Normal
Dimmer adjustment Normal
Analog FIR filter DSD D-1
Zoomed display Normal
Last memory function (Memorization of
each setting)
The following table shows the settings which are saved to
the flash memory.
If the power is turned off immediately after changing any
settings, the settings may not be successfully stored in the
units memory.
Item Selection
Digital input selection
INTERNAL (Internal player),
COAXIAL, OPTICAL-1,
OPTICAL-2, USB
Digital output selection ON, OFF
Super Audio CD/CD
selection
Super Audio CD (SACD), CD
Phase invert button Normal/invert
Dimmer adjustment
Normal, Dim,
Very dim, No light
Analog FIR filter DSD D-1, D-2
Zoomed display Zoomed, Normal