Luxman D-10X, Руководство пользователя

Страница: 21 / 48

18
SUPER AUDIO CD PLAYER D-10X
4. USB digital input terminal (USB)
Use this USB (B-type) input terminal for digital input signals
from a PC or Mac using a USB cable.
The terminal supports the following signals.
• PCM signal
Sampling frequency: 44.1 kHz, 48 kHz, 88.2 kHz,
96 kHz, 176.4 kHz, 192 kHz,
352.8 kHz, 384 kHz,
705.6 kHz, 768 kHz
Quantization bit rate: 16-bit, 24-bit, 32-bit
• DSD signal
Sampling frequency: 2.8 MHz, 5.6 MHz,
11.2 MHz, 22.4MHz
Quantization bit rate: 1-bit
When using Windows OS, our dedicated driver software
needs to be downloaded from the LUXMAN website and
installed before use.
Refer to the “Driver Installation Manual” on the LUXMAN
website for detailed information.
When using Mac OS, this unit is automatically recognized.
Caution:
Connection between a PC and this unit using a USB cable
should not be performed before the installation of the dedicat-
ed driver software is completed. Failure to observe this may
cause malfunction.
5. Coaxial digital input terminal (COAX)
When using this unit as a D/A converter, connect a CD play-
er or the like that has a digital output terminal to this unit
using a coaxial digital cable.
The terminal supports the following signals.
Sampling frequency: 44.1 kHz, 48 kHz, 88.2 kHz,
96 kHz, 176.4 kHz, 192 kHz
Quantization bit rate: 16-bit, 20-bit, 24-bit
6. Optical digital output terminal (OPT)
Connect this terminal to a device such as a D/A converter or
an amplifier that has a digital input terminal using an optical
digital cable. When a Super Audio CD (HD layer selected)
or a DSD file is played back, a digital audio output cannot
be not provided.
When the PCM data of 352.8 kHz, 384 kHz, 705.6 kHz or
768 kHz sampling frequency is played back, a digital audio
output cannot be provided.
This terminal is a shutter-type optical terminal. Direct the
cable connector correctly when inserting the cable into the
terminal. If the cable connector is inserted forcibly in the
wrong direction, the terminal may be deformed and the
shutter may not close even after disconnecting the cable.
7. Coaxial digital output terminal (COAX)
This terminal is connected to an amplifier that has a digital
input terminal using a coaxial digital cable. When a Super
Audio CD (HD layer selected) or a DSD file is played back, a
digital audio output cannot be not provided.
When the PCM data of 352.8 kHz, 384 kHz, 705.6 kHz or
768 kHz sampling frequency is played back, a digital audio
output cannot be provided.
8. Main power switch (MAIN POWER)
Turns this unit to the standby state.
When this switch is set to ON/STANDBY, the standby indi-
cator on the front panel lights up to show that this unit turns
to the standby state.
When this switch is set to OFF, the standby indicator on the
front panel turns off to show that the main power is turned
off.
9. Power cable terminal (AC IN)
Connect the accessory power cable here to supply power
from the AC outlet on the wall.