Luxman C-600f, Руководство пользователя

Страница: 20 / 28

20
TAPE RECORDER CONNECTION .
When any source is selected, its signal is also fed directly to any tape machine connected to the
REC OUT for recording. If you want to connect the C-600f to a tape recorder; you should
connect the REC OUT from the C-600f to the INPUT of your tape/cassette recorder. Then
connect the OUTPUT of your tape recorder to the C-600f
’s MONITOR sockets.
SUBWOOFER CONNECTION
Quite often there are two ways to connect one or two subwoofer(s)
to one’s system.
Speaker output (High Level) or Line Level.
Speaker (High Level) Connection
Simply connect a speaker cable either to the Speaker Terminals and then to the Speaker
terminal INPUT on the Subwoofer. Or alternatively connect an additional speaker cable to the
speaker’s binding post and the other end to the Subwoofer’s Speaker terminal INPUT.
Please ensure that you do not invert the phase by mixing the Left and Right Channel connections.
Best to run one cable at a time and connect Left to Left at each end, then repeat the process for
the Right channel.
Preamplifier (Line Level) Connection
1. Connect the L female RCA (white) end of your interconnect cable to the C-
600f’s L OUTPUT
and connect the other end to the L INPUT on your subwoofer.
2. Ditto for the R channel (red), repeat as above.
HOME THEATER PROCESSOR
In the situation where you would like your C-600f to drive the front Left and Right speakers of your
Home Theater audio system and still be able to enjoy stereo CDs & LPs played through the C-600f.
1.
Connect an RCA cable from the Output of you HT Processor, this will connect to the REC-IN
of the C-600f.
2. Select the REC- input on your Luxman control amplifier by pressing the Monitor switch
3. Set the volume control to -21 dB. (actual Unity Gain is -11 dB)
4. Now calibrate the output volume of your Home Theater Processor to have an
equal amplitude measurement from all your multi-channel speakers as measured at
the central listening position.
5. When you are finished with the Home Theater and want to listen to music again, simply turn
the volume back down to -50 dB and change inputs.
6. You should acquire the habit of lowering the volume, when changing between inputs or before
playing a record.
Connections