Luxman C-600f, Руководство пользователя

Страница: 12 / 28

12
i. Press PRESET once, LR Balance will appear.
ii. Press ENTER once,
iii.
Use the

button to lower by 1 dB increments. To raise, press

 each time
for 1 dB increments.
iv.
Press ENTER once, to lock the setting.
BAL PHASE (Phase Selection for the Balanced Inputs and Outputs)
i. Press PRESET twice, BAL PHASE will appear.
ii. Press ENTER once for IN: BAL-1, Press ENTER twice for IN:BAL -2
iii. Using the

or

buttons, you can now toggle between +3 , -2 or -3 , 2+
iv. In the USA, most balanced products use Pin 2+. While Luxman use Pin 3 +.
v.
Press PRESET to exit.
vi.
The two balanced inputs can be set individually.
vii.
The phase on the balanced outputs can similarly be adjusted by pressing ENTER three
times, you will see
viii. Using the

or

buttons, you can now toggle between +3 , -2 or -3 , 2+
REC OUT
i. Press PRESET three times, REC OUT will appear.
ii. Press ENTER once.
iii. Using the

or

buttons, you can now toggle between ON and OFF.
iv. Press PRESET once to lock the setting.
L-CH R-CH
0 d B 0 d B
PRESET - Balance
BAL OUT
3- , 2+