SP25-SS
Rev. A2 112017
7
Luxier
Installation
1. Install hand shower cradle (1) to the
shower panel by installing the rubber
washer (2) and the locking nut (3) and
attach white plastic hose tube connector
(5) with PVC tubing to complete the
connection. (
NOTE:
Make sure the silicon
gasket (4) is seated properly inside the
connector.)
1
2
3
4
5
2. Mark the positions of the 2 brackets on
the wall and prepare the tile wall for drilling.
Use a piece of painters tape or masking
tape over the drill area to prevent damages
to the tiles.
(
NOTE:
The distance between the two
brackets should be 770 mm or 30.31”)
1”
3.
Using a drill with a tile bit, drill the hole
slowly into the tile. Do not drill into any pip-
ing or wiring in the wall. Insert the anchors
into the wall.
770mm
30.31”
