4
BSH04T Rev. B 06/2018
Luxier USA
Installation
B
A. Shut off water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
D1. Apply Teflon (TPFE) tape on the
shut off valves. Thread the tape in
counter-clockwise direction.
F. Remove aerator from the spout and
let the water run for about 1 minute to
clear any debris in the plumbing system.
Attach the aerator.
D2. Use a wrench to tighten the hoses,
please do not overtighten the connec
-
tions.
E. Turn on the water supply to check for
leaks at all connections.
B. First place the new faucet through
flange on the mounting surface. The
faucet hole should be 1 3/8” in diameter
on the mounting surface.
D1
Flexible water supply line
D2
E
F
A
C
C. Remove the 2 screws from locking
nut. From under the sink, install the
rubber washer, steel washer and locking
nut onto the shank. Tighten the locking
nut with a basin wrench or the socket
tool and install the 2 screws to secure
the faucet in place.
Setscrew (RP415A71)
Handle (RP415G21)
Cap (RP812A42)
Bonnet (RP415G01)
Shank (RP812B73)
Rubber Washer (RP812A55)
Metal Washer (RP812A74)
Screws (RP812A77)
Water Supply Hose
Mounting Nut (RP812A03)
Guide (RP812A48)
Cartridge (RP812A43)
Aerator (RP819S53)
Rubber Washer (RP819S56)
Aerator Trim (RP415G08)
Body
EVA Washer
Flange
