Luxibel B Blind4, Руководство пользователя

Страница: 2 / 7

B BLIND4
V. 04 – 28/07/2021 2 ©AED Distribution nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Luxibel™! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening
electroshocks.
Always disconnect mains power when device not in use or when servicing or maintenance
activities are performed. Handle the power cord by the plug only.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids.
Never put objects filled with liquids on top of or close to the device.
Keep this device away from children and unauthorized users.
Caution: device heats up during use.
Do not stare directly at the light source, as this may cause
 epileptic seizure in sensitive people
 temporarily loss of sight (flash blindness)
 permanent (irreversible) eye damage.
There are no user-serviceable parts inside the device. Refer to an authorized dealer for service
and/or spare parts.
Respect a minimum distance of 0.5 m between the device’s light output and any illuminated
surface.
This device falls under protection class I. It is therefore essential that the device be earthed.
Have a qualified person carry out the electric connection.
 Connect the device to a power line equipped with a 16 A automatic fuse.
 Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
 Do not crimp the power cord and protect it against damage. If the external flexible power cable or cord of
this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a
similar qualified person in order to avoid hazard.
 Shields shall be changed if they have become visibly damaged to such extent that their effectiveness is
impaired, e.g. by cracks or deep scratches.
 Use an appropriate safety cable to fix the device (e.g. VDLSC7N or VDLSC8N).
 The maximum ambient temperature is 45 °C. Do not operate the device at higher temperatures.