Product Name:
Polyresin Fountain with LED light
SKU #:
WHF1434-B
Instruction Manual
SAVE THESE INSTRUCTIONS
–This manual contains important
safety and operating instructions for power units.
MAINTENANCE OF YOUR PUMP:
•
Keep the water clean – clean water will prolong the useful life of your pump.
•
Use a pre-filter on your pump if available.
•
Regular cleaning of the pump will be necessary depending upon the environment in which it is operated. Clean the
pump when it is visibly soiled or when a noticeable drop in performance is detected.
Failure to clean the pump will
result in overheating of the pump and the voiding of the warranty!
•
Before cleaning, always disconnect the pump from the power source.
•
Disassemble the pump by removing the inlet screen & the impeller housing. Remove the impeller/rotor assembly by
gently pulling on the impeller blades. Use a soft cloth or brush to clean the area inside of the pump where the
impeller/rotor assembly was. Clean the inlet screen, impeller housing & impeller in warm soapy water. Reassemble
the pump and inspect for proper operation.
MAINTENANCE OF YOUR FOUNTAIN:
•
Unplug the pump from electric power before servicing, cleaning, or moving.
•
Keep water clean
-
using clean water will reduce mineral deposits and improve water clarity.
•
Clean the fountain periodically to prevent mineral deposits and contamination. Use warm soapy water and a stiff
brush for heavily stained surfaces.
Do not use harsh chemicals as this will damage the finished surface and
void the warranty.
•
Add clean water periodically to ensure that the pump is fully submersed in water.
•
Disconnect the power and empty the basin if the fountain will not be used for an extended time.
•
If installed outdoors and in a freeze-area of the country, ensure that all water is removed and the unit is completely
dry.
This product is NOT to be operated below 41
℉
(5
℃
) freeze damage may occur.
Special Warnings and Cautions:
CAUTION:
•
The pump has been evaluated for use with water only.
•
Do not use the pump in water exceeding 35ºC / 95ºF.
•
Do not use the pump in flammable liquids.
•
Do not use the pump for industrial purposes.
•
Do not use the pump in vehicles or on ships or aircraft or swimming pools.
•
Do not use the pump in location where special conditions prevail, such as the presence of a corrosive or explosive
atmosphere (dust, vapor or gas).
•
Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
•
Do not lift the pump by its power cord.
•
Keep the plug dry. Do not expose the plug to water or steam.
•
Before connecting to the power source, make sure that the pump is assembled and completely submerged in water.
