1.
IMPORTANT SAFETY PRECAUTIONS
READ AND SAVE THESE INSTRUCTIONS
CAUTION:
For residential use only. Do not use to exhaust hazardous or explosive materials and/or
vapors.
CAUTION:
Range hood may have very sharp edges; please wear protective gloves
when
installing,
cleaning or servicing the unit.
This appliance must be installed by a qualified technician. The manufacturer declines all
responsibility in case of failure to adhere to safety standards. Install this hood in accordance
with all the specified
requirements.
WARNING
To reduce the risk of fire, electric shock, or injury to persons, observe the following:
Use this unit only in the manner intended by the manufacturer. If you have any questions,
contact the manufacturer.
Before servicing or cleaning the unit, switch power off at the service panel and lock the
service disconnecting means to prevent power from being switched on accidentally. If the
service disconnecting means cannot be locked, securely fasten a noticeable warning device,
such as a tag, to the service panel.
Installation work and electrical wiring must be done by qualified person(s) in accordance
with all applicable codes & standards, including Fire-rated construction.
Sufficient air is needed for proper combustion and exhausting of gases through the chimney
(chimney) of fuel burning equipment to prevent back-drafting.
Follow the heating equipment manufacturer’s guideline and safety standards such as those
published by the National Fire Protection Association (NFPA), the American Society for
Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code
authorities.
When cutting or drilling into wall or ceiling, do not damage electrical wiring and other
hidden utilities.
Ducted fans must always be vented to the outdoors.
Do not make alterations to the original wiring.
Do not attempt to repair or replace any part of your hood unless it is specifically
recommended in this manual.
All other servicing should be referred to a qualified technician
.
