Lux Tools EXS-240A Скачать руководство пользователя страница 23

Страница: 23 / 80

Additional safety information

• Prevent uncontrolled starting up.

Switch the

product off or pull out the plug if the power sup-
ply is interrupted, e.g. due to a power failure.

• Secure the workpiece.

The workpiece can be

protected from rebounding or from being flung
away uncontrollably by a clamping mechanism
or a vice (e.g. if the tool becomes jammed).

• Keep the workplace clean.

Mixed contamina-

tion by different substances is particularly dan-
gerous. Light metal dust (e.g. aluminium) can
easily ignite or explode.

• Do not use the electrical tool with a damaged

cable. Never touch a damaged cable and
immediately pull out the plug.

Damaged

cables increase the risk of electric shock.

• Avoid overheating the device and workpiece.

Excess heat can damage both tool and product.

• Keep the handles dry and free from grease.

Slippery handles can cause accidents.

• Always heed the applicable national and

international safety, health and labour regula-
tions.

Before commencing work, inform yourself

regarding the regulations valid at the location
where the product is to be used.

• Remember that moving parts may also be

located behind ventilation and venting slots.

• Remember that moving parts may also be

located behind ventilation and venting slots.

Dust extraction

Dusts from materials such as lead-containing paint,
some types of wood, minerals and metal may be
harmful to health. Touching of inhaling the dusts can
cause allergic reactions and/or ailments of the res-
piratory tract of the user or persons in the vicinity.
Certain dusts such as oak or beech dust are consid-
ered carcinogenic, particularly in combination with
wood treatment additives (chromate, wood preserv-
atives). Materials containing asbestos may only be
processed by experts.

– Always use a dust extraction facility.
– Make sure the workplace is well ventilated.
– Always wear a dust protection mask.
– Observe the regulations valid in your country for

the materials to be processed.

Risks caused by vibrations

The vibration values specified in the technical data
represent the main uses of the device. The actual
existing vibrations during use may deviate from
these as a result of the following factors:

• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;

• Insufficient maintenance.

You can reduce the risks considerably by following
the tips below:

– Maintain the device in accordance with the

instructions in the operating instructions.

– Avoid working at low temperatures.
– When it is cold, make sure your body and your

hands, in particular, are kept warm.

– Take regular breaks and move your hands at the

same time to promote circulation.

• Symbols appearing on your product may not be

removed or covered. Information on the product
that are no longer legible must be replaced
immediately.

Personal safety equipment

Your machine at a glance

►

P. 3, item 1

On-Off switch

Rotational speed controller

Connecting pieces

Sanding plate

Scope of supply

• Random orbital sander
• Dust container
• Sanding discs (3×)
• Instructions for use
• Adapter for a vacuum

Commissioning

Fitting the sanding sheet

The fixture of the sanding disc takes place by means
of hook and loop adhesion.

– Carefully align the sanding disc and press it

firmly onto the sanding plate.

Dust extraction

CAUTION! Risk of injury due to vibra-
tions!

Vibrations may, in particular for per-

sons with circulation problems, cause dam-
age to blood vessels and/or nerves.
If you notice any of the following symp-
toms, stop working immediately and con-
sult a doctor. Numbness of body parts, loss
of sense of feeling, itching, pins and nee-
dles, pain, changes in skin colour.

Read and observe the operating instruc-
tions before commissioning.

Wear a dust protection mask when the
work develops a lot of dust.

Wear protective glasses when using
abrading equipment.

Wear ear defenders when working with the
device.

Note:

Both perforated and unperforated

sanding sheets can be used. Dimensions:

►

Technical data – p. 25

Note:

Position perforated sanding sheets

so that the holes in the sanding plate and
the sanding sheet coincide.