Lux Tools 380 335, Оригинальное руководство пользователя, Страница: 18 / 36

18
If you can’t fix the fault yourself, contact your
nearest vendor. Please be aware that any
improper repairs will also invalidate the war-
ranty and additional costs may be incurred.
Disposal
Disposal of the appliance
Appliances which are labelled with
the adjacent symbol must not be dis-
posed of in household waste. You
must dispose of such old electrical
and electronic equipment separately.
– Please check with your local authority
about the possibilities for correct dis-
posal.
– Remove all batteries and battery packs
before disposal.
Through separate disposal you send old
equipment for recycling or for other forms of
re-use. You will thus help to avoid in
some cases that damaging material gets into
the environment.
Disposal of the packaging
The packaging consists of card-
board and correspondingly marked
plastics that can be recycled.
– Make these materials available
for recycling.
Disposal of batteries and accumulators
Disused batteries and accumulators
do not belong in domestic refuse;
they must be disposed of as pre-
scribed by regulations.
– Bring batteries which are no longer usa-
ble to the battery collection point of the
dealer or of your local authority.
– Do not burn batteries. Risk of explosion!
Technical data
Saw power too low Saw blade blunt? Replace saw blade (
►
Chang-
ing the saw blade – p. 16).
Is the saw blade not suitable
for the material? Use suitable saw blades.
The saw vibrates severely Saw blade contorted? Replace the saw blade – do
not use warped saw blades,
discard.
Saw blade fitted incorrectly? Fit the saw blade correctly
(
►
Installing saw blade –
p. 17).
Increased amount of flying
swarf Dust bag full or inlet to dust
bag blocked. Empty dust bag, clean out the
inlet with a brush or vacuum
cleaner.
Fault/malfunction Cause Remedy
Material number 380 335
Rated voltage 220–240 V~, 50 Hz
Rated output S1 1600 W
Protection class II
Protection type IP20
Idling speed 4800 min
-1
Sound power level
(L
WA
)*
108,2 dB(A)
(K = 3 dB(A))
Sound pressure lev-
el (L
PA
)*
95,2 dB(A)
(K = 3 dB(A))
Vibration** 2,936 m/s²
(K = 1,5 m/s²)
Saw blade dimen-
sions ø210 × 2,6 × ø30 mm
Permissible type of
saw blade TCT
Mitre angle, horizon-
tal -45–45°
Incline angle, vertical 0–45°
Max. workpiece
cross-section
65 × 260 mm
(0°/90°)
35 × 260 mm
(45°/90°)
65 × 170 mm
(0°/45°)
35 × 170 mm
(45°/45°)
Dimensions 740 × 430 × 420 mm
Laser
Rated voltage 3 V
Risk class 2
Wave length 650 nm
Classification EN 60825
Batteries 2× LR03, AAA, 1,5 V
GB
temp.book Seite 18 Donnerstag, 7. April 2016 9:58 09