LUVERNETRUCK.COM
•
PRODUCT SUPPORT: 877.287.8634
•
570747-INS-RA
•
01/29/2021
•
ECN7969
•
PAGE 6
Step 10
Once the bracket is in place, the lower mount
is ready to be drilled. Use an 11/32” drill bit
to drill two holes using the two holes in the
lower bracket mount as a guide.
Adjust the lower bracket if needed to ensure
the two holes are fully on the pinch seam.
Step 11
Repeat step 9 and 10 measuring back 68-1/2” and 88-1/2” for the remaining passenger-side brackets.
There will be body plugs in these locations to install the final 2 brackets.
Use a straight edge or level to adjust brackets and tighten all fasteners.
Note:
To complete the installation, refer to the
manual included with your running boards / side steps.
