Lutz B70H Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 24

Lutz B70H Скачать руководство пользователя страница 14

14

en

0698-451 B70H - 07/2020

4. Transport and storage
4.1 Transport

Unpacking and checking condition of delivery

►

Unpack the pump tube on receipt and check for transport damages.

►

Report transport damages to the manufacturer immediately.

►

Check that the consignment is complete as ordered.

!

WARNING

Stator sleeve may release from the pump tube and fall on people

nearby!

►

After each transport, the clamping connection has to be checked

(

→

Fig. 3) for strength.

4.2 Storage

!

WARNING

Danger of injury and intoxication when handling hazardous

liquids!

►

Always wear protective equipment when working on the pump.

►

Complete emptying of pump tube.

►

Store pump at a protected place.

5. Installation/Assembly and connection

!

DANGER

Danger of injury and intoxication when handling hazardous

liquids!

►

Valve spool on the container may only be opened if pump, hose

and shut-off valve are professionally mounted. When starting up,

ensure leak tightness.

!

WARNING

Danger of injury due to rotating stator!

►

Do not start the pump without or with incorrectly mounted stator

sleeve (

→

chapter 8.3).

Fig. 3

«
...
12
13
14
15
16
...
»

Содержание B70H

























Отзывы:

Нет отзывов