background image

8

Lutron Electronics Co., Inc.
Made and printed in U.S.A.
P/N 043-225  Rev. A  1/09

LIMITED WARRANTY

(Valid in the European Union and Asia)

What This Warranty Covers
Lutron warrants each new Unit to be free from defects in materials or workmanship
under conditions of normal use and specified ambient temperature when installed
and operated in accordance with Lutron product specifications and applicable EU
and local safety regulations.

What This Warranty Does Not Cover
This warranty does not cover:

1) Damage or improper operation determined by Lutron to be due to abuse, misuse,
or accident, such as: a. Use of incorrect line voltages; b. Use of incorrect fuses or
breakers; c. Failure to follow operating instructions provided by Lutron; d. Failure to
maintain and operate equipment in accordance with applicable EU and local safety
regulations; e. Failure to maintain equipment under specified ambient temperature; f.
Unauthorized or improper repairs or adjustments; g. Vandalism; and h. Fire, flood,
“Acts of God”, and other problems beyond the control of Lutron.

2) Labor costs to remove and reinstall electronic fixture packs and/or ballasts.

3) Components and equipment external to the Lutron Unit, such as: a. Lamps; b.
Ballasts, sockets, and fixtures; c. Wiring between ballasts and lamps; d. Building
wiring; e. Other manufacturers’ equipment, such as: 1. Time clocks; 2. Audio-visual
equipment; 3. Motion detectors; 4. Photosensors; 5. Driveway sensors; 6. Pressure
pads; 7. Shades; and 8. Spas.

4) The cost of repairing or replacing property other than the warranted Unit.

What Lutron Will Do
To the extent permitted by law, Lutron will, at its option, repair or replace any Unit
that is defective in materials or manufacture which, in Lutron’s opinion, has been
properly installed, wired, insulated, used, and maintained. Lutron shall not be
required to remove, install, or re-install any defective Unit. Credit will be granted
against the purchase price for replacement parts according to the following
schedule:

Although every attempt is made to ensure that catalogue information is accurate and
up-to-date, please check with Lutron EA before specifying or purchasing any unit to
confirm availability, exact specifications, and suitability for your application.
This warranty does not affect the statutory rights of consumer purchasers of the unit.
This product is covered under one or more of the following patents and design
registrations: 
In the United States: D437,834; D441,723; D442,558.
In Canada: 1,332,625; 1,331,769.
In the United Kingdom: 0587878; 2221345B; 2251727B.
In Germany: 69314585.5; 3923022.8.
In France: 0587878.
In Italy: 0587878.
In Japan: 2,819,165; 3079477.
U.S. and foreign patents pending. Lutron, seeTouch, HomeWorks, the HomeWorks
logo, and the sunburst logo are registered trademarks of Lutron Electronics Co., Inc.
NEC is a registered trademark of the National Fire Protection Association, Quincy,
Massachusetts. Bang & Olufsen, B&O, and Beo4 are registered trademarks of Bang
& Olufsen, Struer, Denmark.
© 2009 Lutron Electronics Co., Inc.

Technical Assistance

If you have questions concerning the installation or
operation of this product, call 

Lutron’s European

Headquarters

. Please provide exact model number

when calling.

European Headquarters

Lutron EA LTD
Lutron House
6 Sovereign Close
Wapping
London, E1 9HW England

FREEPHONE: 

0800-282-107 (U.K.)

Tel:

+44-(0)20-7702-0657

Fax:

+44-(0)20-7480-6899

Number of Years from Date of
Installation

Percentage of Cost of Replacement Parts
Credited by Lutron

Up to 2

100%

More than 2 but not more than 5

50%

More than 5 but not more than 8

25%

More than 8

0%

Содержание STBO-4SN









Отзывы: