T R A C K M O U N T I N G
Mount the drapery track to the ceiling using ceiling mount cam locks. Mount the cam locks using the spacing guide-
lines shown below. Mount each end cam lock at a maximum dimension of between five (5) and six (6) inches and
minimum dimension of five (5) inches from each end of system. Space the next bracket on both sides 16 in from the
end brackets. Space the remaining brackets 16-24 in apart.
Note:
All screws must be securely fastened to stud or
structural member.
Top View
The brackets should be mounted on a
straight
and
level line
. If the contour of the ceiling is not
straight
and
level
,
use shims between the cam lock bracket and the ceiling to compensate for the irregularities.
To mount the track to the brackets, position all the cam lock lever arms to the unlocked position
(see “unlocked” diagram below). Position the track up against the cam lock brackets and rotate
the cam lock arm to the locked position.
C A M L E V E R
Orient each cam lever in the position shown below.
This unlocked position allows the track to engage
the cam.
1
5
Ceiling Mounting the Drapery Track
3
Top View
16 in
16-24 in
5-6
in
Level
Line
Window/Wall Side
Swing cam lock arm to lock
track to cam lock bracket. Cam
is fully engaged when the tab
on the cam is against the track.
2
Track
Unlocked
Locked
16-24 in
16 in
5-6 in
Sivoia
®
Drapery
