9
Occupant Copy
Installation Instructions
Or
- Press any button on an EDU to toggle between
unassignment and assignment for that EDU’s
window treatment to the wallstation.
Check window treatment assignments: EDUs for
window treatments assigned to the wallstation
will be at their close limit, and EDUs for window
treatments not assigned to the wallstation will be at
their open limit.
Note:
Once you have assigned window treatments
to a wallstation and exited setup mode, you will
notice the following additional functionality:
- When some or all EDUs assigned to a wallstation
are moving, press any button on the wallstation
to immediately stop all assigned EDUs.
- The position that each EDU moves to when any
but the top or bottom button is pressed is now
programmable (see page 13).
- No matter how or from where their movement
is commanded, whenever all the assigned
EDUs come to a stop and match their
programmed positions for one of the buttons on
the wallstation, the LED next to that button will
automatically light.
Proceed to Step 4.
4.
Exit Setup Mode.
Press and hold the top and
bottom buttons on the wallstation simultaneously for
3 seconds. The LEDs will return to normal.
Press and hold the top and bottom buttons for 3 seconds to
exit setup mode.
or
