13
Occupant Copy
Installation Instructions
Preset Adjustment: Simple Method
Note:
The top button will always open the shades
fully, and the bottom button will always close
the shades fully. Only the shade presets
activated by the intermediate buttons can be
reprogrammed.
1. Use the raise and lower buttons on
the shade keypad to set all EDUs
(electronic drive units of the window
treatments) to the desired preset
levels.
2. Press and hold the respective preset
button on the shade keypad for 3
seconds to save the EDU preset
positions. The LED next to the button
will flash and then light continuously,
indicating the preset has been stored.
Note:
Once EDU presets have been assigned to
buttons on a shade keypad, those presets are
accessible for an EDU only using the shade
keypad it is assigned to, and a shade keypad
can access preset levels only for those EDUs
assigned to it.
Preset Adjustment: Advanced Method
Note:
The advanced method for adjusting presets is
needed only if you wish to have the window
treatments assigned to the shade keypad set at
different positions in the preset. If, however, you
wish all the window treatments in the group to
be lined up with one another in the preset, you
should use the Simple Method above.
Note:
Entering Assignment mode will cause the
window treatments to move between their open
and close limits. Be sure that the open and
close limits have been set correctly.
1. On the shade keypad whose preset you
wish to adjust, press and hold the top
and bottom buttons simultaneously for 3
seconds. The LEDs next to the buttons
will flash. EDUs (electronic drive units)
for the assigned window treatments will
move to their closed limits, and EDUs for
unassigned window treatments will move
to their open limits.
2. Press the preset button you wish to adjust on
that shade keypad. The adjacent LED will blink
rapidly. EDUs for assigned window treatments will
automatically move to their current preset settings.
3. Use the raise and lower buttons
to move all EDUs for assigned
window treatments together to the
desired preset setting.
4. To move an EDU individually to its desired preset
setting, select the EDU using the top button on the
shade keypad. Each time you press the top button,
a different EDU that is assigned to that shade
keypad will open and close in an 203 mm
(8 in.) range. Press repeatedly until the EDU for
the window treatment you wish to adjust moves.
Adjust that EDU to the desired height using the raise
and lower buttons.
Repeat this step for all assigned EDUs you wish to
adjust.
5. Once you are satisfied that all the assigned EDUs
are set to the positions you want to assign as the
preset, press and hold the respective preset button
on the shade keypad for 3 seconds. The preset will
be saved.
6. Press and hold the top and bottom buttons on the
shade keypad simultaneously for 3 seconds to exit
to normal mode. The LEDs next to the buttons will
stop flashing.
