FC-SENSOR, FC-VSENSOR, FCJ-010, FCJ-ECO
®
S p e c i f i c at i o n S u b m i t ta l
page
Job Name:
Job Number:
Model Numbers:
Lutron
R
PowPak
®
Fixture Controls
369866c 3 09.10.15
Wired:
• Maximum of one (1) PowPak
®
fixture sensor
occupancy/vacancy/daylighting sensor
Note:
Only one PowPak
®
wireless fixture control
can be used per PowPak
®
fixture sensor, and only
one PowPak
®
fixture sensor can be used per
PowPak
®
wireless fixture control.
Wireless:
• Maximum of ten (10) Pico
R
wireless controls
• Maximum of ten (10) Radio Powr Savr
TM
occupancy sensors
• Maximum of one (1) Radio Powr Savr
TM
daylight sensor
Test
Link
Test
Link
Pico
R
wireless control
(up to 10)
Radio Powr Savr
T
occupancy sensor
(up to 10)
Radio Powr Savr
T
daylight sensor
(1 maximum)
PowPak
®
wireless
fixture
control
PowPak
®
fixture
sensor
The following can be used per each PowPak
®
wireless fixture control:
Notes:
• When using a Radio Powr Savr
T
daylight sensor in conjunction with both a PowPak
R
wireless fixture control and
PowPak
R
fixture sensor, the Radio Powr Savr
T
daylight sensor will provide the daylighting input to the control
module, and the PowPak
R
fixture sensor daylighting input will be ignored.
• When using a Radio Powr Savr
T
occupancy sensor in conjunction with both a PowPak
R
wireless fixture control
and PowPak
R
fixture sensor, occupancy data from both sensors is used; either one detecting occupancy will
turn the lights on, and the lights turn off only when both sensors have gone vacant (no longer detect occupancy).
• Grouping can be accomplished by following the basic procedure described in the install guide found at
www.lutron.com for putting multiple control modules into association mode. This enables a Radio Powr Savr
T
occupancy sensor or Radio Powr Savr
T
daylight sensor to group and control more than one fixture together.
• Radio Powr Savr
T
occupancy sensors can be used with the PowPak
R
fixture sensor to add coverage area.
3