www.ivalolighting.com
610.282.7472
Ivalo Finiré 4” LED Recessed Lighting
Installation Instructions
367-2202
h
2 05.31.16
Fixture Installation
(continued)
7. For adjustable fixtures, adjust the tilt of the lamp module
(Figure 3)
.
a. Loosen tilt-adjust locking thumb screws.
b. Adjust aim of fixture by moving the module support bracket
along the track to one of the three stopping positions.
c. Tilt module support bracket to the desired angle.
d. Tighten thumb screws.
8. Install mud ring (Trimless only)
(Figure 4)
.
Note:
Trimless fixtures come with a screw hole template to assist
with mounting the mud ring.
a. Insert 4 screws (provided by others) into holes in mud ring and
screw into fixture
.
Screw length depends on ceiling thickness.
b. Use screws to level.
c. Ensure screws secure mud ring flush to drywall.
d. Apply plaster up to rim of mud ring.
e. Smooth plaster to blend with ceiling.
9. Install trim
(Figure 5)
.
a. Trimmed (round and square) and trimless (round):
i. Compress torsion springs at sides of trim
ii. Slide into trim brackets
iii. Allow springs to expand, drawing trim up into fixture
b. Trimless (square):
i. Push trim into opening until clips engage on sides
10. Restore Power.
Mud ring
Rim
Figure 4
Drywall
Plaster
Figure 5
Trim
bracket
Torsion
spring
Spring
clip
Torsion spring based trim
Spring clip based trim
Note:
LED emitter
module removed
for visual clarity.
Tilt-adjust
locking
thumb
screw
Figure 3
Track
Stopping position
Module support
bracket
