English
Français
Esp
añol
Português
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
Made and printed in the U.S.A. 7/03 P/N 043-113 Rev. A
LIMITED WARRANTY
Lutron will, at its option, repair or replace any unit that is defective in materials or manufac-
ture within two years after purchase. For warranty service, return unit to place of purchase or
mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephone
the Lutron Technical Support Center toll free at 800-523-9466. After the two year period, a
pro-rated warranty applies to this product until eight years after the purchase. For more infor-
mation regarding this warranty contact your Lutron representative.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE
IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PUR-
CHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION,
REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE,
OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING OR
INSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUT
OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY,
OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. Some states do not allow the exclusion or limi-
tation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you.This product may be covered by one or more of the following U.S. patents:
5,736,965; 5,838,226; 5,905,442; 5,982,103; D389,461; D436,579; RE35,364; RE36,703;
RE37,986 and corresponding foreign patents. U.S. and foreign patents pending. Lutron and
HomeWorks are registered trademarks of Lutron Electronics Co., Inc.
© 2003 Lutron Electronics Co., Inc.
Technical and Sales Assistance
If you need assistance, call the toll-free
Lutron
Technical Support Center
. Please provide exact
model number when calling.
(800) 523-9466 (U.S.A., Canada and the Caribbean)
Other countries call:
Tel: (610) 282-3800
Fax: (610)
282-3090
Visit our Web site at www.lutron.com
FCC Information
Note:
This equipment has been tested and found to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the seperation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not expressly approved by Lutron Electronics Co. could
void the user’s authority to operate this equipment.
Troubleshooting Guide
Symptom
Cause and Action
No power available to Receiver.
• Verify adapter is plugged in and receptacle is powered.
Faulty adapter.
• Replace adapter.
Receiver has not been addressed.
• See the HomeWorks
®
Utility online help for setup details.
Receiver has an address, but has not been programmed.
• Upload programming to system using the
HomeWorks
Utility.
Visor Control Transmitter has not been learned to Visor Control
Receiver.
• Learn Transmitter to Receiver, following the instructions on page
2.
LEDs on the Receiver do not light.
Pressing a programmable button on the Receiver (or its learned
Visor Control Transmitter button) causes the Receiver to
quickly
flash all its LEDs simultaneously.
Pressing a programmable button on the Receiver (or its learned
Visor Control Transmitter button) causes the Receiver to
slowly
flash all its LEDs simultaneously.
The Visor Control Transmitter is not communicating with the Visor
Control Receiver.
