Lutron Electronics CM-9930R, Руководство по эксплуатации

Страница: 10 / 20

5-2 DCV, ACV Measurement
1) Connect BLACK test lead into " COM " terminal.
2) Connect RED test lead into " V " terminal.
3) If measure " DCV ", select the " Function rotary switch "
( 3-4, Fig. 1 ) to the " V " position then push the
" FUNC. button " ( 3-9, Fig. 1 ) for display show " ".
4) If measure " ACV ", select the " Function rotary switch "
( 3-4, Fig. 1 ) to the " V " position then push the
" FUNC. button " ( 3-9, Fig. 1 ) for display show " ".
5) When LCD show the " AUTO " marker, the meter is
under the " auto range " mode., the meter will select the
suitable measurement range automatically.
6) Under the operation of " auto range " mode, push the
" Range button " ( 3-10 Fig. 1 ) will hold the range.
5-3 Resistance Measurement
1) Connect BLACK test lead into " COM " terminal.
2) Connect RED test lead into "
Ω " terminal.
3) Select the " Function rotary switch " ( 3-4, Fig. 1 ) to the
" Ω " position then push the " FUNC. button "
( 3-9, Fig. 1 ) for display show " Ω ".
4) When LCD show the " AUTO " marker, the meter is
under the " auto range " mode., the meter will select the
suitable measurement range automatically.
5) Under the operation of " auto range " mode, push the
" Range button " ( 3-10 Fig. 1 ) will hold the range.
5-4 Continuity Check
1) Connect BLACK test lead into " COM" terminal.
2) Connect RED test lead into "
Ω " terminal.
3) Select the " Function rotary switch " ( 3-4, Fig. 1 ) to the
7