Lutool LT3IN1, Инструкция по эксплуатации

Страница: 18 / 31

11.7 Adjusting the torque
The torque is adjusted by rotating the torque setting (2), the torque is greater when the torque setting is
set on a higher position. The torque is less when the torque setting is set on a low position“1”denote
lowest and “ ” denote highest.
Torque is set by means of a torque setting according to different screw types and different materials. If
the screw is long and the material is hard, you can adjust to a higher torque setting as follows:
1 - 5 For driving small screws
6 - 10 For driving screws into soft material
11 - 16 For driving screws into soft and hard material
17 - 21 For driving screws into hard wood
For heavy drilling
11.8 Speed selector (Fig. 10)
Low speed Position High speed Position
Fig. 10
NOTE : Mark “1”is the Low speed position, mark “2”is the High speed position. It is moulded into the
button of two speed selector (3).
The drill has a two-speed gear train designed for drilling at 1 (LOW) or 2 (HIGH) speed.
A gear selector is located on top of the drill to select either low or high speed. When you push the
button (3) forward and select low speed range, the speed will decrease but will provide more power and
torque.
When using the cordless drill in the high speed range, the speed will increase but will provide less power
and torque.
Use low speed for high power and torque application and high speed for fast drilling applications.
IMPORTANT: To avoid damage NEVER adjust this two speed selector
（
3
）
whilst the
drill is running. Always let it come to a complete stop first.