42
43
Wilma
Wilma
Deut
sc
h
Engli
sh
Customizing the brightness levels
4
4
Press and hold the button until one
green LED
lights up.
release the button
The range of brightness levels you can select will
begin automatically
to cycle, as shown below.
Press the button at the brightness level you want.
the
first power-on click
is presented
You have the option to setup to
4 brightness levels
, in any sequence
0.3 W
brightness level
3 W
brightness level
7 W
brightness level
28 W
brightness level
14 W
brightness level
RVLR*
1.5 W
brightness level
5 W
brightness level
23 W
brightness level
10 W
brightness level
SOS*
19 W
brightness level
Alpine SOS*
28 W
14 W
1.5 W
4.
3.
2.
1.
1.
Default setting:
3. brightness level
1. brightness level
2. brightness level
Recover factory settings:
Upon releasing the button,
the sequence
of brightness levels automatically
restarts
, allowing you to set a
second
level
in the same manner as the first click
set-up. This process can be repeated up
to four times, but will stop when you quit
making further selections, thus allowing
your light to operate in
1-step, 2-step,
3-step,-or 4-step modes.
Default setting
Press and hold the button for about 8 seconds, until
5
red LEDs
turn on.
release the button
2.
Disconnect the battery, and all factory settings will be restored.
Flash*
*
Will not be signalised by status LED
This mode offers a slow flash mode.
RVLR:
This mode is extremely irritating and may by no means be misused.
Flash 15hz: (Disorientation)
SOS will continue until the battery is empty.
Improper use of the SOS
signal is punishable by law.
SOS:
Alpine SOS will continue until the battery is empty.
Improper use of the SOS
signal is punishable by law.
Alpine SOS:
App available:
All changes to the light can also be made by
the free Light Control App for IOS and Android.
With the App it is also possible to remote
control the light and the status monitor offers
additional informations.
