Lupine Wilma R, Руководство пользователя

Страница: 21 / 23

40 41
Deut
sc
h
Engli
sh
Troubleshooting
Problem
The light does not come on
and the power LEDs do not
flash when the battery is
plugged into the lamp.
With the battery plugged in,
the power LEDs do not come
on, but the PCS LEDs flash.
The Power LEDs do not stay on
for as long as they should.
Even after charging only
the 20% LED will light up
at the Smartcore battery.
Cause
Extremely discharged battery.
Battery not plugged into the
light or not plugged in
properly.
Faulty LED unit.
Discharged battery.
Old battery.
Very low ambient
temperature.
Faulty charger.
Unsuitable battery.
The indicator was reseted.
Solution

Charge the battery. Before
doing so be SURE to read
the “Battery cannot be
charged” section below.
 Check all plug contacts.

Replace the LED unit.

Charge battery.

Replace battery.
 Keep battery warm.
 Replace charger.

Use original Lupine battery.

Discharge the battery with
your light and fully charge it
afterwards.
The lamp does not recognize
the transmitter.
Lamphead and transmitter
are not linked.
 See chapter operation
remote control.
The transmitter does not light up
while pressing the button and the
lamp does not react.
Button cell empty or
wrong side up.

See chapter operation
remote control.
Technical data
Battery runtime varies according to battery age and condition, as well as ambient
temperature.
Default setting
Lens beam angle:
Operating
temperature:
Wilma with 6.9Ah battery: 3 h 35 min.
Wilma with 13.8Ah battery: 6 h 45 min.
26° 6.9Ah 7.2 V Li-Ion
13.8Ah 7.2 V Li-Ion
-25 °C – +70 °C
28 W 3600 lumen
23 W 3050 lumen
19 W 2550 lumen
14 W 2000 lumen
10 W 1500 lumen
7 W 1100 lumen
5 W 800 lumen
3 W 500 lumen
1.5 W 250 lumen
0.3 W 70 lumen
Light output: Runtime:
Wilma with 13.8Ah battery:
3 h 20 min.
4 h 10 min.
5 h
6 h 45 min.
9 h 30 min.
14 h
19 h
32 h
63 h
310 h
Charging time:
Battery capacity; nominal voltage:
Input voltage: 100 – 240 V~, 50 – 60 Hz
Charging current:
up to 1.9 A
Compatible batteries: Li-Ion 7.2 V
Charger Wiesel:
Wilma with 6.9Ah battery:
1 h 45 min.
2 h
2 h 30 min.
3 h 20 min.
4 h 45 min.
6 h 45 min.
9 h 30 min.
16 h
31 h
150 h
Hereby, Lupine lighting systems GmbH declares that the radio equipment type Bluetooth remote control V2
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: https://www.lupine.de/documents/ce