Lupine Betty R 9/12, Руководство пользователя

Страница: 21 / 27

40 Betty R 41 Betty R
En
gl
is
h
1 W
brightness level
0.3 W
brightness level
*
4 W
brightness level
12 W
brightness level
40 W
brightness level
22 W
brightness level
RVLR*
2 W
brightness level
8 W
brightness level
34 W
brightness level
16 W
brightness level
SOS*
28 W
brightness level
alpine emergency*
Default setting
Customizing the brightness levels
4 4
Press and hold the button (for approx. 4 seconds) until one green LED lights up.

release the button
The range of brightness levels you can select will begin automatically to cycle, as shown below.
Press the button at the brightness level you want.

the first power-on click is presented
You have the option to setup to 4 brightness levels , in any sequence
40 W
22 W
2 W
4.
3.
2.
1.
1.
Default setting
3. brightness level
1. brightness level
2. brightness level
Recover factory settings:
This mode includes an additional slow flash mode.
RVLR:
Upon releasing the button, the sequence
of brightness levels automatically
restarts , allowing you to set a second
level in the same manner as the first click
set-up. This process can be repeated up
to four times, but will stop when you quit
making further selections, thus allowing
your light to operate in 1-step, 2-step,
3-step,-or 4-step modes.
Press and hold the button for 8 seconds, until 5 red LEDs turn on.

release the button
2.
3.
Disconnect the battery, and all factory settings will be restored.
Reconnect the transmitter with the lamphead see page 39.
* In working condition, this level
will not be indicated by red LEDs.