5
6
3.
3b.
150
50
50
150
20
20
Do not use too much force or the log will break. If the log does not go to its place, check that it is straight on the
tongue and groove of the lower log. The logs are planed / timber lined with adequate tolerance so that the
fitting does not require a lot of force.
Start building the log framework by selecting 6 base logs
(semi-logs),
. Build the
from these logs Notice that the outer bottom boards are placed about 10 mm inwards
from the side walls. There are two reasons for this: if it rains, the area between the bottom board and the first
wall log will stay dry. The outer bottom boards will also function as supporting edges for the floor boards.
When the lowest log framework is assembled, check that it is in right angle by measuring it from corner to
corner and attach the bottom logs to each other and to the foundation beams according to the
with
screws or nails (Note: drill the holes beforehand).
A1, B1, C1
D1, E1 and F1
bottom framework
.
picture 4
Lillevilla 100 C-3 English 220109
