– GB –
INSTRUCTION MANUAL
CAUTION:
Follow the instructions carefully to ensure correct
and safe operation.
Keep this sheet for future needs. Contact the
supplier for any problem.
Keep the packaging label to allow for production
batch tracking in the event of a complaint. The
fixture cannot be modified. Any modification will void
the warranty and can make the product dangerous.
MOUNTING INSTRUCTIONS:
Carefully observe the indications shown in the
pictures.
Connecting the fixture
Fit the cable gland and fully tighten the lock nut.
Feed the power cable trought the rubber romme,
fully tightening the nut. Connect the power cables
to the terminal, as illustrated in figure 2, fixing them
under the special cable clamp.
Aiming the fixture
to aim the spotlight, refer to scale (X) fig.3 on the
side from wich the grub screw (K) fig.1 is fastened.
Made the aiming, tighten well the blocking bolts.
(A) Position of holes to be drilled in bracket.
(B) Reference.
Any damaged components shall be replaced with
similar ones.
TURN THE POWER OFF DURING MAINTENANCE
CAUTION:
Replace damaged protection shields using Lumx
spare part.
Presence of dangerous voltages.
This equipement can be installed on normally
inflammable surface.
TECHNICAL DATA:
Model class:
II
Protection degree:
IP65
Optics:
Symmetrical
Model lamp:
RX7s
Dimension:
450 x 315 x 150 mm
Weight:
6 Kg
Min.dist. lighted object
0,5 m
Type of cable
5m H07RN-F (2 x 1,0 mm
2
)
