To be able to operate the station using the mobile application, you must connect to it via WiFi.
On the device where the application is installed, find a network named LumniCleanse and
connect to it using the password 44448888. After connecting to the station, go to the
application.
The app is used for different activities depending on the model.
Standard (D02) and LED (D04) models:
In the case of these models, the application is used only to change the basic settings of the
station, such as: language, volume, special command on / off, disinfectant dose setting or child
protection on / off.
Comfort (D03) and Smart & Safe (D07) models:
In addition to the activities of the Standard model, in the application, you can track the
temperature measurements taken by the station or change its unit.
Multimedia model (D05):
In the case of this model, in addition to all of the above items, two buttons from the "Settings"
Kiosk Mode and Select Movie apply. Their use only makes sense when we use this application
on a multimedia device that is built into the station.
If the purchased station is equipped with sensors measuring air quality in the application, you
can follow the measurement results using the AQ button.
* does not apply to the Face ID model
