SETTING CONFIGURATION
You can configure the following settings in the station:
●
Language of voice prompts (English, German, Polish, Spanish, French, Italian,
Swedish, Danish, Japanese, Russian)
●
Volume
●
Enable / disable the WiFi signal
●
Enable / disable Special commands (a message that will be spoken when the sensor
detects a passing person)
●
Set the temperature measurement unit Celsius / Fahrenheit (if applicable to the
given station model)
These settings can be changed in two ways using the menu in the station and the mobile
application.
MENU*
The menu on the station is displayed on the screen on the front of the station. It is activated
and operated by means of two motion sensors located on the front of the station and in the
hand sanitiser bay.
To display the menu on the screen, do the following:
1.
Turn off the station
2.
Turn it on again while keeping your hand in the hand sanitizer compartment
3.
Wait until the screen shows the MENU items, then the hand can be removed.
To navigate through the menu, activate the appropriate sensors with a wave of your hand. To
move between positions, activate the sensor in front of the station, confirm by activating the
sensor located in the recess. If you want to return to the previous menu list, without any
changes, then wait a few seconds. The screen will automatically revert back to the main Menu.
* does not apply to the Face ID model
MOBILE APPLICATION*
The application is available for iOS and Android, and can be found in the AppStore or the Play
Store under the name LumniCleanse Stand, or using the following QR Code:
* does not apply to the Face ID model
