*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Please read all instructions prior to installation and keep for future reference!
4. CEILING MOUNT ONLY
5. TYPE IC
6. INHERENTLY PROTECTED
Page 5 of 6
7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
Models TOVE-R-XX
Tove recessed mount
-
Installation Instructions
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. MORE THAN ONE PERSON IS RECOMMENDED FOR THIS
INSTALLATION.
3. SUITABLE FOR DRY LOCATIONS
A
trim edge
lens
Replacing LED Module
A.1
Carefully remove the lens from the fixture, by pushing the provided tool
in the end of the lens. Slowly pull lens completely out.
A.2
Locate the dead module and remove screws on the sides and pull
out.
A.3
Remove the wire clips from the module, and remove security wire
from the back of the module.
A.4
Get the new module and refer to step 5 to complete.
(make sure to also install security wire to the new module).
screw
A.2
A.3
A.1
REV0.2 04132018
