*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Please read all instructions prior to installation and keep for future reference!
Page 2 of 6
4. CEILING MOUNT ONLY
5. TYPE IC
6. INHERENTLY PROTECTED
5.1
Secure the conduit into the fixture housing and connect conduit using the provided connector.
5.2
Align the housing mounting holes to the mounting channel bolts, and from the inside of the fixture tighten the hex nuts. If joining fixture section together reference step 9.
5.3
If necessary the flush trim version may have to be slightly adjusted to be flush with drywall. Slightly loosen the hex nut until housing flush to drywall then tighten nut.
wood
block
5.2
housing
hex nut
bolt
5.1
housing
5
main power
access module
mount
access module
hex nut
drywall
6
6.1
Make all the proper wire connection, refer to the wiring on page 6.
Connect all quick connects from one board to the next.
5.2
5.2
7
7.1
Push all the wires & connectors into the housing and then align the LED
panel into the housing and secure using the provided screws.
screw
flush trim only
hex nut
5.3
7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
Models TOVE-R-XX
Tove recessed mount
-
Installation Instructions
7.1
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. MORE THAN ONE PERSON IS RECOMMENDED FOR THIS
INSTALLATION.
3. SUITABLE FOR DRY LOCATIONS
LED panel
quick
connect
6.1
6.1
LED panel
LED panel
flanged trim shown
REV0.2 04132018
