Please read all instructions prior to installation and keep for future reference!
4. TYPE IC
5. INHERENTLY PROTECTED
Page 4 of 4
7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
Models TOVE-G-XX
Tove T-Grid
-
Installation Instructions
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. MORE THAN ONE PERSON IS RECOMMENDED FOR THIS
INSTALLATION.
3. SUITABLE FOR DRY LOCATIONS
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
REV0.2 04132018
Wiring Diagrams
Lutron Ecosystem H-series wire power supply wiring
Lutron Ecosystem 3 wire power supply wiring
driver
3 way
dimming control
hot (blk)
dim hot (org)
neutral (wh)
ground (gr)
rd (+V)
blk (-V)
to line voltage
to LED module
eldoLED 0-10V Dimming power supply wiring
driver
to LED module
to 0-10V
to line voltage
rd (+V)
blk (-V)
line (blk)
neutral (wh)
ground (gr)
0-10V (-)
0-10V (+)
eldoLED Dali power supply wiring
driver
to LED module
to dali
to line voltage
rd (+V)
blk (-V)
line (blk)
neutral (wh)
ground (gr)
DALI (-)
DALI (+)
DALI (-)
DALI (+)
driver
to ecosystem bus
E1 (per)
E2 (per)
hot (blk)
neutral (wh)
ground (gr)
rd (+V)
blk (-V)
to line voltage
to LED module
driver / emergency battery pack
to constant line voltage
unswitched line (blk)
switched line (striped blk)
neutral (wh)
ground (gr)
test point (tp)
test switch/pilot light
test switch/pilot light must be connected to the battery during installation to work.
By just connecting the terminal connector to the battery.
