Please read complete instruction prior to installation and keep for future reference!
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
7777 N. Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
Page 2 of 4
E472444
Installation Instructions for
Kurba Vertical & Kurba Horizontal
Models KBL-XX & KBM-XX
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR WET LOCATIONS
5. SURFACE MOUNT ONLY
CAUTION:
Reference diagram below on Can and Can-nots,
when it comes to installing the Kurba Horizontal & Vertical !!!
Kurba Vertical
(KBL-XX)
Kurba Horizontal
(KBM-XX)
CAN
CAN-NOTS
2.5” radius
minimum
2.5” radius
minimum
LED surface
(gray color)
LED surface
(gray color)
bend in this direction only
LED surface
(gray color)
LED surface
(gray color)
twisting Kurba, will cause
damage to the LED
CAN
CAN-NOTS
bend in this direction only
twisting or bending LED in these positions will
cause damage to the LED
twisting or bending LED in these positions will
cause damage to the LED
bend LED in these positions only to avoid damage
bend LED in these positions only to avoid damage
twisting Kurba, will cause
damage to the LED
LED surface
(gray color)
bending in the same
direction as the LED,
will cause damage to the LED.
Do not make sharp
bends, near the endcap
LED surface
(gray color)
bending in the same
direction as the LED,
will cause damage to the LED.
Do not make sharp
bends, near the endcap
REV0.3 06262018
