luminii Bosca BOS C Series, Руководство по установке

Страница: 5 / 6

Please read all instructions prior to installation and keep for future reference!
Page 5 of 6
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
info@luminii.com
www.luminii.com
E472444
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SURFACE MOUNT ONLY 5. SUITABLE FOR WET LOCATIONS, MUST USE APPROPRIATE
WEATHERPROOF RATED WIRE CONNECTORS.
6. SUITABLE FOR INSTALLATION WITHIN THE CLOSET STORAGE SPACE
7. INHERENTLY PROTECTED
Adjustable hinge installation
Bosca Wet
-
Installation Instructions
Models BOSW-XX-AH-XX
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
REV0.5 07262018
1
1.1 Slightly loosen both screws on the sides of the hinge bracket.
Rotate the fixture to expose mounting hole.
mounting bracket
mounting
bracket
fixture
mounting
hole
2
Note:
Prior to installation all 24VDC wires must be present
near fixture. Refer to the power supply installation instruction
for additional information.
Note:
More than one person is recommended for this
installation.
2.1 Determine the location of the fixture. Then secure the fixture to
the surface using the provided mounting screws.
2.2 Rotate the fixture to the desired angle then tighten the side
screws to secure.
1.1
2.1
2.1
4.1 C24 VDC red wire from
the fixture to the power 24
VDC red wire with a wire nut.
Connect -24VDC black wire from the
fixture to power supply -24VDC
black wire with a wire nut.
4
class II
power
supply
24 VDC 120 VAC
+2
4 VDC RED
-2
4 VDC BL
A
CK
-2
4 VDC BL
A
CK
+2
4 VDC RED
4.1
to fixture
screw
2
Option 2- Feed wire whip to the power supply.
OR
Option 1- Secure female quick connect to
male quick connect. Feed male quick connect
wire through conduit to power supply.
2.1 Follow one of the two options to connect the
fixture to the power supply.
female quick
connect
male quick
connect
to power supply
wires from
fixture
wires from
fixture
1.1