Bosca
-
Installation Instructions
Please read all instructions prior to installation and keep for future reference!
Models BOS-XX-C-XX
Page 2 of 6
1. PRODUCT TO BE INSTALLED BY A QUALIFIED
ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR DAMP LOCATIONS
5. SURFACE MOUNT ONLY
6. SUITABLE FOR INSTALLATION WITHIN THE CLOSET STORAGE SPACE
7. INHERENTLY PROTECTED
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
4.1
C24 VDC red wire from the fixture to the power supply
+24 VDC red wire with a wire nut. Connect -24VDC black wire
from the fixture to power supply -24VDC black wire with a wire
nut.
4
class II
power
supply
24 VDC
120 VAC
4.1
to fixture
+2
4 VDC RED
-2
4 VDC BL
A
CK
-2
4 VDC BL
A
CK
+2
4 VDC RED
Note:
Refer to the power supply installation instruction for
additional information.
Note:
More than one person is recommended for this
installation.
1
1.1
Carefully remove the mounting channel from the back of the
fixture. Mounting channel is 1/2" shorter than the fixture for
wire management.
2.1
Determine the location of the fixture. Then secure the mounting
channel to the surface with the provided mounting screws. When
installing the mounting channel take into consideration the 1/2"
shorter per wire lead/connector.
2.2
Install mounting screws every 6 inches to the center of the mounting
channel.
1.1
2
mounting channel
fixture
lead wires
screw
mounting channel
2.1
screw
3
Option 2-
Feed wire whip to the power supply.
OR
3.1
Follow connector dimensions below and drill hole through surface.
Insert wire lead/connector through surface & snap fixture into the
mounting channel to secure in place.
Option 1-
Secure female quick connect to
male quick connect. Feed male quick connect
wire through conduit to power supply.
3.2
Follow one of the two options to connect the fixture to the
power supply.
female quick
connect
male quick
connect
to power supply
mounting
channel
fixture
wires from
fixture
wires from
fixture
3.1
3.2
3.2
Female quick
connect end
0.45"
Male quick
connect end
0.38"
Female/male
adapter
0.45"
Lead wire
end
0.20"
E472444
Clip-in installation
REV0.5 07272018
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
