Luminex LumiSplit 1.6, Руководство пользователя

Страница: 7 / 20

WALL MOUNT
To mount a LumiSplit 1.6 on the wall, you must attach the wall
mount brackets (LU_10_00126).
Connect the brackets with 4 screws, re-used from the device.
WIRE* CONNECTION
Green/Yellow AC Ground
Blue AC Neutral
Brown AC Line
* International (Harmonised) Standard
2.2 Power up the device
Power-up the device with a power cable with Neutrik® powerCON®
TRUE1 connection (J) (please contact your local dealer if you don’t have
a suitable power cable on hand). The device will automatically switch
on. To shut it down after use, just un-plug the power cable again.
After connecting the power cable correctly, by default the power LED
indicator on the front panel will light up in green.
The LumiSplit requires standard AC power distribution from 100-
240VAC, 50/60Hz. The mating Neutrik® powerCON® TRUE1 connector
is supplied; however, you will need to purchase or construct a cable
appropriate for your application.
When installing a new connector please refer to the following wire
colour code reference:
J
7
2 | INSTALLATION /
2.1 MOUNTING THE DEVICE / 2.2 POWER UP THE DEVICE