LUMINELL 7072720003985, Инструкция по установке и эксплуатации

Страница: 45 / 67

7 OPERATION/USE
LUMINELL SWEDEN AB 45
INSTALLATION MENU SETTINGS
Position settings
There are up to four fixed position memories (A, B, C and D) which can be individually
programmed.
By selecting one of the positions the searchlight should be moved to desired position with
wheel and joystick. Also adjust light angle and dim level that is optimal for the new position.
Confirm new position with "
OK " or exit the menu with " Back ".
The new position can be added as a shortcut on the "
homescreen " and be accessible with a
single button press, see link .
Note : Previously stored position is always overwritten by the new.
Store origin
This menu is used to calibrate the systems “ZERO” point for both vertical and horizontal axis
and thereby synchronize between searchlight and panel indicator.
To store new press “
OK
” then follow the info on the display saying that the searchlight should
be moved to correct “zero” point with wheel and joystick.
The zero position of the lamp should be adjusted to be in level with horizontal plane and in
direction straight forward of the vessel (normally).
Confirm new origin with "
OK " or exit the menu with " Back ".
3s
Simultaneously press and hold dim and light angle
button for 3 seconds to enter " Installation menu "