Luminate LEAP-10, Руководство по установке оборудования

Страница: 9 / 19

1
0
| Ethernet Ports Luminate Wireless Access Point Installation Guide
Ethernet Ports
The Luminate Wireless AP is equipped with two 100/1000Base-T (RJ-45) auto-sensing, MDI/ MDX wired-
network connectivity ports. These ports require IEEE 802.3at Power over Ethernet (PoE+) compliance,
accepting 57 VDC (nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment
(PSE) such as a PoE+ midspan injector, or network infrastructure that supports PoE+.
Figure 3 Gigabit Ethernet Port Pin-Out
Console Port
The serial console port allows you to connect the AP to a serial terminal or a laptop for direct local management. This port
is micro-AB USB. Connect it directly to the USB connector of a laptop using a standard Type A to micro Type A or Type
B cable.
1
2
3
4
5
6
7
8
BI_DC+
BI_DC-
BI_DD+
BI_DD-
BI_DA+
BI_DA-
BI_DB+
BI_DB-
1000Base-T Gigabit
Ethernet Port
RJ-45 Female
Pin-Out
Signal Name
Function
Bi-directional pair +C, POE Positive
Bi-directional pair -C, POE Positive
Bi-directional pair +D, POE Negative
Bi-directional pair -D, POE Negative
Bi-directional pair +A, POE Negative
Bi-directional pair -A, POE Negative
Bi-directional pair +B, POE Positive
Bi-directional pair -B, POE Positive