Luminate LEAP-10, Руководство по установке оборудования, Страница: 6 / 19

Luminate Wireless Access Point Installation Guide
2
Hardware Overview
The following sections outline the hardware features of the Luminate Wireless Access Point. This chapter covers:
“LEDs” on page 9
“DC Power Socket” on page 11
“Kensington Lock Slot” on page 11
“Ethernet Ports” on page 12
“Console Port” on page 12
LEDs
The Luminate Wireless AP is equipped with five LEDs that indicate the status of the various components of
the AP. The LEDs by default operate in quiet mode. Turn off approximately five minutes after the AP is
powered on.
Figure 1 LED
Table 1 LEDs
LED Status Definition
Power On - Green
Red
Off*
Device Powered
Initial Power up
No Power up