14
U.L. Model No.: CF654
7.1
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box or Circuit
Breaker Panel .
Check the operation of the Fan by gently pulling on the
Pull Chain Switch .
During Summer Months: Run the Fan Counter-
Clockwise, as you look up at it, to direct airflow
downward .
During the Winter Months: Run the Fan Clockwise,
as you look up at it, to direct airflow upward .
If airflow is desired in the opposite direction, turn the
Ceiling Fan OFF and wait for the Blades to stop turning .
Slide the Reverse Switch (located on the side of the
switch housing) to the opposite position, and turn the
Ceiling Fan on again (Figure 21) .
The Fan Blades will turn in the opposite direction and
reverse the airflow .
7. Using Your Ceiling Fan
REVERSE
SWITCH
SWITCH
HOUSING
ASSEMBLY
7.2
Cut the 3-Speed Switch Pull Chain to a desired length
(optional) .
Connect the Wood Pendant (supplied) to the
3-Speed Switch Pull Chain by sliding the Wooden
Pendant (small hole first) onto the Pull Chain
(Figure 22) .
Attach the Chain Coupler to the end of the Chain
and allow the Wooden Pendant to fall down over the
Coupler .
Your Fan model is equipped with a 4-position,
3-Speed Pull Chain Switch (Figure 22) . The operating
sequence is as follows:
Three-Speed
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF
3-SPEED
SWITCH
PULL CHAIN
WOODEN
PENDANT
COUPLER
Figure 22
Figure 21
Reverse Switch Information
Season
Blade Rotation Direction
Summer
Counter-Clockwise
Winter Clockwise
NOTE: The Reverse Switch is covered by a soft
vinyl rubber seal to prevent entry of water into the
Switch Housing Assembly.
