02001027
Rev 1 ECO 7062
Operation Manual:
LDD-600/1000/1500-XX-YY
Page 5 of 13
LDD-600/1000/1500-XX-YY SPECIFICATIONS
XX = Iout
max
YY = Vout
max
XX * YY cannot exceed Pout
max
Model Pout
max
Iout
max
Input Voltage
Size (L x W x H)
LDD-600-XX-YY
600W
Can be configured
from 10A to 100A
100-240VAC
9.9” x 7.2” x 2.5”
25.1 x 18.3 x 6.35 cm
LDD-1000-XX-YY
1000W
100-240VAC
LDD-1500-XX-YY*
1500W
200-240VAC
Auxiliary Outputs
: +5V @0.25A
+15V @0.25A
-15V @0.25A
* LDD-1500 input voltage: 200-240VAC
Maximum compliance voltage determined by maximum rated power
RS-232 Option available
Other outputs available upon request
Input
Voltage:
See
table
above
Power Factor:
>.98
Interface
Connector:
15 Pin “D” Sub Female
Current Program:
0-10V for 0-Max Current
Current Monitor:
0-10V for 0-Max Current
Voltage Monitor:
0-10V for 0-Max Voltage
Performance
Rise/Fall Time:
~600usec (10% to 90% Full Current)
Current Regulation:
0.5% of Maximum output current
Temperature Drift:
0.5% over temperature range after 30 minute warmup (<0.5% in first 30 minutes)
Current Ripple:
<0.5% of maximum output current
Current Overshoot:
<1% of maximum output current
Power Limit:
Limited to maximum power with power fold-back circuit
Environment
Operating Temp:
0 to 40
o
C
Storage:
-20
to
85
o
C
Humidity:
0 to 90% non-condensing
Cooling:
Forced
air
Regulatory
Leakage Current:
<350uA
Approvals:
Medical Safety:
UL60601-1, IEC 60601-1, EN 60601-1, CAN/CSA C22.2 No. 601.1-M90
Industrial Safety
UL60950
Emissions/Immunity:
FCC 47 CFR Class A Emissions, EN55011:1998 Group 1 Class A Emissions,
EN61000-3-2 Limits for harmonic current emissions, EN 610000303 Flicker,
EN60601-1-2:2001 Electromagnetic emissions and immunity for medical
equipment
Dimensions:
See Figure 2, LDD-600/1000/1500 Outline Drawing
