lumiglas
lumiglas
®
All dimensions in mm unless stated otherwise. Subject to change without prior notice.
Min 01.07 0093.012.96
Using the hinged mounting bracket the luminaire is
mounted on the cover flange of the circular sightglass fitting
or flow indicator or on the slotted cover nut of the screwed
sightglass. Alternatively: on a screwed sightglass mounting
with flanged adapter collar is possible.
• The Lumiglas luminaire model USL06-Ex, using the
appropriate mounting bracket or adapter collar, suits the
following nominal sizes of sightglass:
• Mechanical installation:
Unit fitted as combined light and sight port.
Fitting DIN 28120 using hinged bracket.
Unit fitted to screwed sightglass used as light port only;
mounted by means of flanged adapter collar.
• Mounting example:
• Mounting with hinged bracket
The hinged bracket serves to secure the luminaire to the
cover flange of a circular sightglass unit (also of a flow indi-
cator) or the slotted cover nut of screwed sightglass similar
to DIN 11851.
The bracket is fixed using the M8 screw supplied, and a
blind hole drilles and tapped on the bolt pitch circle of the
cover flange face. Alternatively the bracket can be welded
on.
• Mounting with flanged adapter collar:
The adapter is mounted onto (screw – or weld connection)
the slotted cover nut (DIN 11851).
• Replacement parts:
a) for both versions
Part
Cat. No.
- screwed lens ring (light exit)
1774.033.00
- reflector, Spot
5904.047.00
- reflector, Flood
5904.048.00
- O ring seal (Viton)
0862.039.00
- lamp socket G
4
(2 pin
)
1202.011.00
- lamp socket GY6.35 (2 pin)
1202.012.00
- lamp socket, GZ 10
1202.024.00
b) for Version I (with cable tail)
Part
Cat. No.
- Cable entry gland complete with
- 2 m connecting cable
1084.013.00
- 5 m connecting cable
1084.015.00
- 10 m connecting cable
1084.016.00
- 20 m connecting cable
1084.017.00
c) for Version II (with terminal box):
Part
Cat. No.
- flat gasket for cover
0.854.058.00
- trumpet cable entry gland assy
9108.008.00
• Filament lamps (Halogen):
Part
Cat. No.
-
12 V/20 W – GY6.35
3232.240.00
-
24 V/20 W – G4
3232.206.00
-
24 V/20 W – G4 (reflector, spot)
3232.222.00
-
12 V/35 W – GY6.35
3232.232.00
-
12 V/50 W – GY6.35
3232.238.00
-
24 V/50 W – GY6.35
3232.242.00
- 230 V/50 W – GZ10
3232.261.00
Type of fitting
from
Hinged bracket Flanged
DN
adapter collar
Circular sightglass fitting
DIN 28120
50 …
+
–
DIN 28121
50 …
+
–
Flow indicator
50 …
+
–
Screwed sightglass
65
–
+
fitting
80
+
+
similar DIN 11851
100
+
+
125
+
–
• Accessories:
claw spanner (for lens ring) Cat. No. 6805.001.00
• Servicing:
- keep luminaire clean
- after opening of luminaire, lightly lubricate thread of
lens ring (4) (e.g. with AEMA-SOL 6B, manufactured by
A. E. Matthes).
- note mean figure for lamp life!
- use only genuine replacement parts!
F.H. Papenmeier GmbH & Co. KG · division Lumiglas
Talweg 2 · 58239 Schwerte · GERMANY
phone: +49-23 04/205 0 · fax: +49-23 04/205 206
e-mail: [email protected]
www.lumiglas.de
