![Lumex LF2020 Easy Lift STS Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/lumex/lf2020-easy-lift-sts/lf2020-easy-lift-sts_user-manual_1948399014.webp)
LF2020-INS-LAB-RevG18
14
MAINTENANCE SCHEDULE
Info: Only qualified persons should service and repair your Lumex LF2020 Easy Lift STS /
LF2090 Bariatric Easy Lift STS. Regular maintenance of your patient lift is necessary to
ensure continuing proper and safe operation. Read and observe the following recommended
maintenance schedule:
Item
Inspect
initially
Inspect / Adjust
daily
monthly
every 6
months
Base, Casters, and Foot Paddle
Ensure that base is level (all four wheels touch the floor)
x
x
x
Ensure that bolts and nuts are tight
x
x
x
Ensure that casters swivel and roll freely
x
x
x
Apply White Lithium Grease to caster ball bearings
x
Check rubber parts of casters for deflection
x
x
Check welding joints for rust and cracks
x
Ensure that base opens and closes smoothly
x
x
x
x
Ensure that base locks securely in three positions
x
x
x
Ensure that base locking knob is in place and operating properly
x
x
x
Inspect all base hardware for wear
x
Mast
Ensure that mast is fully engaged and locked into mast sleeve
x
x
Inspect mast for bends or deflections
x
Inspect all mast hardware for wear
x
x
Boom
Inspect boom for bends or deflections
x
x
Ensure that boom is centered between the base legs
x
x
x
Inspect all boom hardware for wear
x
Inspect sling hooks for wear or deflections
x
x
Check connections between boom and mast for improper
connection, looseness, or wear
x
x
Slings and Sling Hardware
Check slings and straps for wear and damage; discard if worn
x
x
Inspect metal/plastic parts for wear or damage
x
x
Lubrication with White Lithium Grease
Lubricate all pivot points
x
Lubricate top and bottom of actuator mounting
x
Cleaning
Clean with mild non-abrasive detergent
x
Actuator and Electronics
Ensure that batteries are charged
x
x
Inspect for proper up / down operation
x
x
Ensure that mounting hardware is tight
x
x
Inspect mounting hardware for wear
x
Ensure that control box is firmly affixed to the mast
x
x
Ensure that the actuator connecting cable is tight
x
x