3
5-pin female XLR socket
DMX/RDM input/output
Ethernet socket
Supports Power over Ethernet
REAR PANEL CONNECTIONS
RDM
TX2
TRANSMITTER UNITS
TX
TRANSMITTER UNIT
RDM
FX
FLEX TRANSMITTER/RECEIVER UNIT
ETHERNET NODE
The Ethernet enabled CRMX Nova units can act as Ethernet to
DMX or DMX to Ethernet nodes for a multitude of Ethernet proto-
cols. For specific instructions refer to the SuperNova user guides
available at www.lumenradio.com/supernova.
100-240VAC
power input
Use only one power
source.
12VDC power input
Polarity is unimportant
5-pin male XLR socket
DMX input
RX
AND
RDM
RX
RECEIVER UNITS
5-pin female XLR socket
DMX output (and RDM on
RDM
RX
units)
12VDC power input
Polarity is unimportan
t
100-240VAC
power input
100-240VAC
power input
12VDC power input
Polarity is unimportant
No conversion
Normal operation
only, between
the XLR socket
and the wireless
output.
DMX to Ethernet
Signal from XLR
socket is sent to
Ethernet socket
as well as wireless
output.
Ethernet to DMX
Signal from
Ethernet socket
is sent to XLR
socket and wireless
output.
MODE
Please see the Specifications table on
page 4 for details of power requirements
for each model.
POWER REQUIREMENTS
WARNING
USB socket
not used
5-pin male XLR socket
DMX/RDM* input for
port
B
Ethernet socket
Supports Power over Ethernet
5-pin male XLR socket
DMX/RDM* input for
port
A
12VDC power input
Polarity is unimportant
* RDM input supported on
RDM
TX2
units
100-240VAC
power input