2
Network switch
SuperNova
RF L
ink
DMX
RDM
Ethe
rnet
Loc
k P
owe
r
RDM
F
CRMX Nova unit
LINKING
CRMX Nova units can link with any other CRMX units as well as legacy W-DMX™ (G2/G3/G4) transmitters (2.4 GHz only).
TO UNLINK
•
Unlink one
: On the receiver,
press and hold its
button for
more than 3 seconds to
unlink it from a transmitter. The
RF Link
indicator will extinguish.
•
Unlink all
: On the transmitter,
press and hold its
button for
more than 3 seconds to unlink
all of its receivers.
TO LINK
1. Ensure the antenna is connected.
2. Power on the transmitter and receiver(s).
3. Ensure that the RF Link indicators on all receivers are off to indicate that the
receiver(s) are ready to be linked. (If necessary, follow the unlink procedure.)
4. On the transmitter, press and release the
button.
5. The transmitter will search for any unlinked receivers. Its RF Link indicator will flash
for 10 seconds and normal operation will resume.
6. The RF Link indicator will change to a steady on-state on successfully linked
receivers.
FLEX MODE CHANGING (CRMX NOVA FX ONLY)
The CRMX Nova Flex unit offers the ultimate flexibility to operate as either a transmitter or a receiver. The CRMX Nova Flex unit
is pre-configured as a
receiver
. The mode can be changed in either of two ways:
1. Using the SuperNova software. Please refer to the SuperNova website at www.lumenradio.com/supernova for more
information.
2. Using a special button press sequence on the CRMX Nova Flex unit.
SuperNova runs on any Windows, Mac OS X or GNU/Linux computer with a Java runtime environment of at least version 1.6.
The latest version of SuperNova as well as detailed user guides can be accessed at www.lumenradio.com/supernova.
1. Press and release the
button five times in succession. Then immediately press and hold the
button for three
seconds until the Lock and Power indicators begin alternately flashing. One of the signal quality indicators will be on:
Amber indicator on: Receiver mode selected
Red indicator on: Transmitter mode selected
2. You can now change the Flex mode as required. Note that the unit will automatically revert to normal operation fifteen
seconds after you last pressed the button.
• To step between Flex modes: Press and release the
button to move to the next mode.
• To save changes: Press and hold the
button for three seconds. The unit will revert to normal operation using the newly
selected mode.
• To exit without saving changes: The unit will revert to normal operation if you do not press the
button within fifteen
seconds.
SUPERNOVA
For configuration, management and monitoring of all CRMX units
as well as RDM compatible devices, LumenRadio provides the soft-
ware SuperNova free of charge. SuperNova is needed in order to
configure network and port settings, manage frequency usage, etc.
SuperNova connects to any number of CRMX transmitters through
Ethernet. For best performance, LumenRadio recommends using
a network switch and straight through Ethernet cables. All CRMX
units equipped with Ethernet are delivered with the following
default network settings:
IP Address: 192.168.0.162
Netmask: 255.255.255.0
UNIT FACTORY DEFAULTS