AirGlow radio module integration guide
Version: 2 March 17, 2022
LumenRadio AB
www.lumenradio.com
Phone: +46 31 301 03 70
Svangatan 2B
Fax: +46 31 301 03 80
SE-416 68 Gothenburg
Sweden
VAT reg. no: SE556761749201
10
AirGlow module development kit
An AirGlow development kit is available
for purchase and can be used to
evaluate performance and is also good
resource when integrating the module
into a product.
In the development kit a development
board with the AirGlow module is
included together with an Arduino
compatible shield. The shield contains
all required peripheral circuitry for
controlling a DALI enabled LED driver.
The shield also has an integrated low
power DALI PSU.
Schematics and BOM of the AirGlow
Arduino compatible shield is available for download on the AirGlow module support page.
10.1
Zhaga book 18 connector wiring diagram
In the development kit two Zhaga book 18 connectors and two AirGlow devices are included.
These connectors can be used together with the AirGlow devices and below are two wiring
diagrams for a D4i certified and a non D4i certified driver. It is fully possible to use a non D4i/DALI2
driver together with AirGlow as it is fully backwards compatible with legacy DALI standards.
Using a non D4i compliant driver requires that a DALI PSU and a separate 24VDC supply is
required for compliance against Zhaga book 18. Please refer to the
information.
Wiring diagram for a
non
D4i certified driver
Wiring diagram for a D4i certified driver
