lumenstudio
™
software user manual
lumenstudio
™
software user manual
32
33
The Lumentouch and Lumencue controllers have an internal clock and calendar with battery backup. This allows you to
trigger your scenes by date and time, for a maximum of 40 different calendar triggers. Simply drag your scenes onto the
calendar. The example below will trigger scene 1 at 10am on the 26th June.
- Note that the controller needs to be ON in order for the triggers to activate.
Double click a trigger to edit. Re-occuring events can be set here. In the example below,
our scene is set to be triggered every Saturday in August.
VI Calendar Mode
To begin, before plugging your Lumentouch into your computer be sure that the switch on the bottom marked USB/EXT is
switched to USB. Next, plug the USB cable from your laptop/computer to the mini-USB port on the bottom of the Lumen-
touch beside the USB/EXT switch.
NOTE: REMOVE PROTECTIVE FILM FROM LUMENTOUCH, this will affect the touch capabilities.
Now you can open Lumenstudio. A dialogue box will pop up. If your Lumentouch device is properly connected, the middle
option ‘Click here to work with the USB-DMX interface’ will be available. Choose this option and hit OK.
Lumenstudio will now open with no shows loaded. To load a pre-existing show, choose the File button in the top left corner
and choose Open…
VII Uploading a Show - Direct to Device
Connecting the Lumentouch to a Laptop via USB
Setup
