Lumena VIAMAX Hiway MAX 40W PIR Solar Street Light Скачать руководство пользователя страница 4

Full product range & more information: 

www.lumenalights.com

 

MODES / SETTINGS:

 

 

 

The Hiway MAX is an auto-adjust, multifunction solar light. All modes will only function during darkness. When switched on 

during daytime, the LEDs will illuminate initially and then turn off after approximately 4 seconds. 
 
Lamp automatically flashes once after every time the Main Button / Remote 

Control Buttons are pressed to confirm successful programming. 
 

 

BUTTON CONTROL 

Press the main power button on the lamp to select the relevant working mode 

 

Press once for On / Mode A 

 Constant Lighting (from dusk, 4 hours at 

60% brightness, then, sensor mode 

 Pre-set) 

 

Press a second time for Mode B 

 PIR Mode (100% full brightness when 

movement is detected, then, returns to 30% brightness after 20 seconds 
of no detection) 

 

Press a third time to turn off (remote control will not work if switched off 

at main button) 

NOTE:

 Main Button Control settings are factory pre-set. To change time and brightness, the remote control must be used. 

 
 
REMOTE CONTROL 

Press the main power button on the lamp once to turn on, then the remote control can be used to amend settings / turn on and 
off.  
Remove tab from battery before use. 

 

MODE A: Constant Lighting Mode (Solar Street Lighting) 

C

onstant ‘on’ for selected time 

(2hr, 4hr, 6hr, 8hr, 10hr or 12hr).  

Adjustable brightness level (60%, 80% or 100%). 

 

Press 

“Constant Lighting Mode” Button

 

 

 

Press selected “Time” Button

 

 

Press selected “Brightness” Button

 

MODE B: Motion Sensor Mode (Solar Security Lighting) 

30% constant light from dusk, increases to selected brightness for 
approx. 20 seconds when PIR triggered by movement within 12m.  

 

Press “Sensor Mode” Button 

 

 

Press selected “Brightness” Button

 

Recommended for extremely poor weather conditions 
 
 
MEMORY FUNCTION 

When settings are changed, the last setting become the new default. 
With every new lamp cycle, it will continue in the latest default working mode. 
If the lamp is turned off via the button, the setting will return to original default when manually turned back on. 

 

Page 4 of 4 

 

Отзывы: