Lumel NA6, Руководство пользователя

Страница: 54 / 77

"#
Name Unit Quantity name
Constant identifying the device 7000 7500 Identifier r -
Register describing the current state of
the meter
It is the register defining the control
procedure of the analogue output
(controllability)
Minimal value of the currently measured
value of channel 1
Maximal value of the currently measured
value of channel 1
Currently measured value of channel 1
7002 7501 Status 1 r -
7006 7503 Steering
out
r %
7008 7504 Min 1 -
7010 7505 Max 1 r -
7012 7506 Value 1 - -
7014 7507 Hour - Current time
The
value
is
placed
into
two
successive
16-bite
registers.
These
registers
include
the
same
data
as
32-bite
registers
from
the
area
7500.
The value is placed into 32-bite
registers
Writing
(w)
Readout
(r)
r
6.6. Registers only for readout
Register describing the current state of
the meter
7004 7502 Status 2 r -
Minimal value of the currently measured
value of channel
7016 7508 Min 2 - r
Note !
– At the moment of exceeding the upper or lower range, „displayed value”,
„minimum”, „maximum” parameters are set on the value 1E+20.
– For the parameter Cnt =0 (Measurement switching off and display of the
current time), „minimum”, „maximum” and „displayed value” parameters are
set on the value 1E+20.
1) In case of registers no occurring in the given meter series, their values is 1E+20
Maximal value of the currently measured
value of channel 2
7018 7509 Max 2 - r
Currently measured value of channel 2 7020 7510 Value 2 - r
All manuals and user guides at all-guides.com